Mastercam 2018 level manager free download

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website. Please help us to share our service with your friends. Share Embed Donate. Information might have changed or been added since this document was published.

The latest version of the document is installed with Mastercam or can be obtained from your local Downloadd. A ReadMe file ReadMe. PDF — installed with each release — includes the latest information about Mastercam features and mastercam 2018 level manager free download. Mastercam features new functionality focused on delivering speed and efficiency to your machining jobs. Product Changes Two changes have been made нажмите чтобы перейти the Mill Entry product.

The 2D chamfer Contour type is now available for a 2D Contour toolpath. Technical Support—Our Technical Support department or [email protected] is open Monday through Friday from a. Visit our website, or select Help, Tutorials from Mastercam’s File tab to see the latest publications. Take advantage of more than videos to master skills at your own pace and help prepare for Mastercam Certification.

For more information on Mastercam University, please contact your Authorized Mastercam Reseller, visit www. For tech tips and the latest Mastercam news, follow us on Facebook www. Visit our YouTube channel to see Mastercam in action www. Registered users can search for information or ask questions on the Mastercam Web forum, forum.

This includes improvements to selection, general toolpath enhancements, and other functions not specific to one product line. Analyze Enhancements Listed below are enhancements made to the Analyze functions, located 0218 the Home tab. Analyze Toolpath 5-axis vector information Analyze Toolpath now includes XYZ location data corresponding to the mouse location at the start green or end red of the toolpath segment.

This information is in addition to the feed and speed data that is shown between the start and end of the segment. Use the Opacity mastdrcam to control their translucency. Analyze Distance Along Curve allows you to find mastercam 2018 level manager free download distance along a line, arc, or spline edge without having to trim or break it first.

Unlike Analyze Distance, Analyze Distance Along Curve does not measure a linear distance, but rather the length along the curve between two userdefined points. This function reports the following position mastercam 2018 level manager free download as they relate to the Посмотреть еще origin: l Distance l Start angle 15 What’s New in Mastercam — General Enhancements l End angle l Sweep angles Lathe coordinates Analyze Position now displays when a DZ construction plane is now active.

Propagate arc radius When using Analyze Entity on an arc or radius, you can now apply a diameter to all selected arcs by selecting Propagate arc radius on the dialog box.

Statistics Statistics now reports the number of sheet solids in the current part file. Now, Face center points and Center points are independent of each other. The Command Finder opens as a floating window that can be repositioned and remains on-screen until you close it.

Enter a word in the Command Finder and Fere returns cree list of possible matches that include a short description of the function. Double-click a search result to open that function. In Mastercamyou can also create new viewsheets by clicking New to the right of the viewsheet tabs. The new tab is highlighted, so that you can input the name immediately after creating the viewsheet. By default, the new plane is added to the Planes Manager.

Delete Duplicates Delete Duplicates now identifies duplicate arcs, even when they have different start and end angles. No Hidden Dimmed 20 What’s New in Mastercam — General Enhancements Endpoints Endpoint display has been enhanced, now displaying as solid white circles with a black outline to provide contrast with different geometry and background colors. Mastercam 2018 level manager free download can toggle Endpoints on the Home tab to display or hide geometry endpoints.

Your setting will persist across multiple sessions of Mastercam. The size of the endpoints is not configurable, doqnload they do not scale when the screen is re-sized. Improved access to chaining tolerance Chaining tolerance is now stored with the chains in the Chain Manager. The value in the Chain Manager only affects the selected toolpath and is applied to all subsequent regenerations of the operation.

Other toolpaths will continue to default to the chaining mastercma set in the Tolerances page of System Configuration. As with other operations in Mastercam, when you move or modify the geometry used majager the Probe operation and regenerate, the operation will update with the new geometry.

You no longer need to recreate the Probe operation. Stock display The Stock Display and Stock Shading options, that were previously available on the View tab in Mastercam downlpad, are now located on the specific machine type tab and have been mastercam 2018 level manager free download.

In the case of Mill, Router, and Wire machine types, Mastercam 2018 level manager free download Display works as it did in previous versions. For Lathe and Mastercam 2018 level manager free download machines, fee can now control which stock components are leve, in the graphics window. For Mill-Turn machines, the available components depend on your Job Setup and your current machine. If a component is not defined feee available for your mastercam 2018 level manager free download machine setup, the option is disabled from the Stock Display drop-down.

Guided Chaining You can now guide and select the next entity in a chain when a branch point has been reached. Guided chaining is available ссылка на продолжение 3D Wireframe and Linked Edges mode for solids.

One or more blue arrows display pointing in the direction of any alternate branches as shown in the following example. Two new controls are now available on the Chaining dialog box: Use Next to continue in the direction of the red arrow. Alternately, you can click on the red or blue arrow to advance the chain in that direction.

Keep names when exporting solid bodies When exporting solids to other CAD formats, Mastercam will now export the solid name data with the bodies. Naming levels and mastercam 2018 level manager free download bodies from imported solid assemblies When importing solid assemblies, Mastercam’s file importers use a new protocol to populate both the Solids and Levels Manager. Mastercam processes the solid depending on what type of information is available from the incoming file format.

Acronis true image 2017 installer download there is no level or body name data in the imported file, the body and the level name are the file name. Levels Manager l l l l Level names from the imported file or assembly are preserved in the Mastercam part file.

Even when importing from formats with no level data, Mastercam places the imported solid bodies on separate levels. The level name is based on the solid body name, when possible. When the information is читать далее in the original file, Mastercam 26 What’s New in Mastercam — General Enhancements assigns the solid body name to each level.

To change this behavior, deselect Assign Level names to match Solid names on the Converters page of System Configuration. Mastercam organizes the various solid bodies читать an assembly in the Solids Manager. Whenever possible, Mastercam names each imported solid body.

Multiple bodies with the same name will have numbers appended. Bodies in separate part files in assemblies will include the name of the assembly in the Solids Manager. Ignore blanked entities in count Select Ignore blanked entities in count from the Display options dropdown to not include blanked entities in the Entities column count. This option is off продолжение здесь default.

Previously, blanked entities were included in the entity count and caused confusion between the count and visible entities on a level. Import via drag and drop You can now drag and drop a supported file for example. Mastercam Simulator Listed below are manageg made to Mastercam Simulator, accessed through the Toolpaths Manager.

You can add a bookmark, clear downlaod bookmark, or clear all bookmarks. Use Automatic Bookmark to insert bookmarks at certain locations, such as a tool change or operation change.

Mastercam 2018 level manager free download bookmarks are then displayed on the playback bar. Simply select any bookmark icon to display the part as it is at that moment. You can also use Create Bookmark on the playback bar to lvel a bookmark. If you exit Mastercam Simulator or regenerate the адрес, the bookmarks are cleared automatically.

They do not persist between sessions. Create presentation You can now create a presentation from Mastercam Simulator. Saving a presentation lets you preserve your settings and layout of your Mastercam 30 What’s New in Mastercam — General Enhancements Simulator session and can be used to show a simulation on any computer, even if it does not have Mastercam.

Select Save Presentation on the Home tab to create your presentation. Select Verify from the Toolpaths Manager, and select Simulation on the Home tab to view the machine simulation. Use the Components tab to set up stock and fixtures. Use the Data tab to set tolerances. Use the Simulation tab to set the machine, position, and tolerance. If you do not have masteercam machine selected when entering Mastercam Simulator, Mastercam will default mastercam 2018 level manager free download a generic machine mastercam 2018 level manager free download a machine that was selected in the Machine Simulation dialog box for the standalone Machine Simulation.

Once logged in, you have access to Mastercam’s social media outlets, your Reseller information, the Mastercam forum, lebel other helpful information. Alternately, you can select a member of the group, which will select the entire group. This new option is located on the Nesting Configuration dialog box. New location for temporary files Temporary nesting files now go into Mastercam’s default temp folder When creating a new plane by using the on-screen, dynamic gnomon, from the Planes Manager, using Trim to Plane, etc.

When editing an existing plane, the Edit Plane function panel opens. The function panels share the same controls, which are enabled or disabled as appropriate for the current mode. Import via drag and drop You can now drag and drop a supported file onto the Planes Manager to import the file’s planes.

The Plane Selection dialog box displays and lets you select which planes to import. The planes are imported into the mastercam 2018 level manager free download Mastercam file.

 
 

Educational CAD/CAM Software Solutions | Mastercam Products

 

Mastercam will run on lower resolution screens but beware of potential sizing issues with larger dialog boxes and panels which may be awkward to work with. Lower resolution monitors may work fine as a second monitor in a dual screen setup. Mastercam will run on large format displays, including 4K monitors and high-DPI devices however, we do experience some display issues with these configurations. We have found that one of the best computer upgrades is to invest in a NVMe drive.

These drives are now priced at a point which makes them a good investment. Many of our test systems employ a smaller primary NVMe drive for the OS and installed applications with a second large capacity conventional drive for data. A 3D mouse improves the way you interact with your 3D application. It is designed to be used by your non-dominant hand in tandem with a standard mouse for a balanced and cooperative work style. Additional technical and purchase information can be found on the 3Dconnexion website.

Most computers today have some kind of anti-virus software to protect from unwanted malware. In some cases, these have been found to interfere with applications such as Mastercam which are running on the computer.

CNC Software does not recommend specific anti-virus products, but if you see unexpected issues, it may be a conflict with anti-virus software. Try temporarily disabling the anti-virus software or setting an exception for Mastercam.

Our global community of Mastercam users, experts, educators, and enthusiasts helps you get the most from your investment. If you want to learn CAD for free, you may find training opportunities through local community programs and various online platforms.

Mastercam University is a great place to get started, but you should eventually seek hands-on training using CNC equipment. This may be accomplished through on-the-job training or at an educational institution like a technical or community college. The Learning Edition enables practice using Mastercam for free, so you can design parts and apply cutting strategies, but it will not produce G-code.

Mastercam University is one option—but at some point, you will want to have hands-on training using CNC equipment to produce parts. You may also find online and in-person training opportunities hosted by your local Mastercam Reseller. Skip to content. Learn how the Mastercam Educational Suite can help you prepare your students for rewarding futures in technology and manufacturing. Advanced Toolpaths Reduce costs and cut programming time with advanced toolpaths like Deburr and Equal Scallop.

Create Horizontal and Parallel Lines. Create Arc Tangent. Create Arc Endpoints. Create Fillet. Transform Mirror The Geometry. Transform Offset.

Trim Geometry. Create Rectangular Shapes. Create Letters. Transform Dynamic. Remove Solid History. Create Arc Polar. Transform Rotate. Create Line Parallel. Create Points. Create a Spline. Create Net Surface. Create Ruled Surface. Solids from Surfaces. Solid Extrude. Solid Circular Pattern. Create Curves On All Edges. Extrude Solid Body. Boolean Remove. Trim Solid by Plane. Model Prep Pull-Push. Model Prep Move. DLL Chook This tutorial takes approximately twenty minutes to complete.

Step Preview: 3. Figure: 3. You can undo as many steps as needed. To delete unwanted geometry, select the geometry first and then press Delete from the computer keyboard.

We are creating the lines to use them as part of the geometry as well as construction lines. NOTE: The construction plane or the graphics view does not affect the way in which the solid is generated.

A Mastercam file can contain separate levels for wireframe, surfaces, drafting entities, solids, and toolpaths. By organizing your files into levels, you can easily control which areas of the drawing are visible at any time and which parts are selectable. By doing so, you will not inadvertently make changes to areas of the drawing you do not want to change.

In this step, we will change the Active Level to 2 to create the solid on Level 2. Mastercam extrudes entities by driving the shapes of the entity along a linear path using a specified direction, distance, and other parameters that further define the results.

Chaining is the process of selecting and linking geometry entities such that they form the foundation of a toolpath, a surface, or a solid. When you chain the geometry, you can select one or more sets of curves lines, arcs, and splines that have adjoining endpoints. Chaining differs from other selection methods because it assigns order and direction to the selected curves.

Chaining order and direction determine how surfaces, solids, and toolpaths are generated. NOTE: If you did not select the chain correctly, you can use the Unselect button dialog box to undo the previous selection. Delete Duplicates Delete Duplicates now identifies duplicate arcs, even when they have different start and end angles.

No Hidden Dimmed 20 What’s New in Mastercam — General Enhancements Endpoints Endpoint display has been enhanced, now displaying as solid white circles with a black outline to provide contrast with different geometry and background colors. You can toggle Endpoints on the Home tab to display or hide geometry endpoints.

Your setting will persist across multiple sessions of Mastercam. The size of the endpoints is not configurable, and they do not scale when the screen is re-sized. Improved access to chaining tolerance Chaining tolerance is now stored with the chains in the Chain Manager. The value in the Chain Manager only affects the selected toolpath and is applied to all subsequent regenerations of the operation. Other toolpaths will continue to default to the chaining tolerance set in the Tolerances page of System Configuration.

As with other operations in Mastercam, when you move or modify the geometry used in the Probe operation and regenerate, the operation will update with the new geometry.

You no longer need to recreate the Probe operation. Stock display The Stock Display and Stock Shading options, that were previously available on the View tab in Mastercam , are now located on the specific machine type tab and have been expanded.

In the case of Mill, Router, and Wire machine types, Stock Display works as it did in previous versions. For Lathe and Mill-Turn machines, you can now control which stock components are displayed in the graphics window. For Mill-Turn machines, the available components depend on your Job Setup and your current machine. If a component is not defined or available for your current machine setup, the option is disabled from the Stock Display drop-down.

Guided Chaining You can now guide and select the next entity in a chain when a branch point has been reached. Guided chaining is available in 3D Wireframe and Linked Edges mode for solids. One or more blue arrows display pointing in the direction of any alternate branches as shown in the following example.

Two new controls are now available on the Chaining dialog box: Use Next to continue in the direction of the red arrow. Alternately, you can click on the red or blue arrow to advance the chain in that direction. Keep names when exporting solid bodies When exporting solids to other CAD formats, Mastercam will now export the solid name data with the bodies.

Naming levels and solid bodies from imported solid assemblies When importing solid assemblies, Mastercam’s file importers use a new protocol to populate both the Solids and Levels Manager. Mastercam processes the solid depending on what type of information is available from the incoming file format.

If there is no level or body name data in the imported file, the body and the level name are the file name. Levels Manager l l l l Level names from the imported file or assembly are preserved in the Mastercam part file.

Even when importing from formats with no level data, Mastercam places the imported solid bodies on separate levels.

The level name is based on the solid body name, when possible. When the information is present in the original file, Mastercam 26 What’s New in Mastercam — General Enhancements assigns the solid body name to each level. To change this behavior, deselect Assign Level names to match Solid names on the Converters page of System Configuration. Mastercam organizes the various solid bodies of an assembly in the Solids Manager.

Whenever possible, Mastercam names each imported solid body. Multiple bodies with the same name will have numbers appended. Bodies in separate part files in assemblies will include the name of the assembly in the Solids Manager. Ignore blanked entities in count Select Ignore blanked entities in count from the Display options dropdown to not include blanked entities in the Entities column count.

This option is off by default. Previously, blanked entities were included in the entity count and caused confusion between the count and visible entities on a level. Import via drag and drop You can now drag and drop a supported file for example,. Mastercam Simulator Listed below are enhancements made to Mastercam Simulator, accessed through the Toolpaths Manager.

You can add a bookmark, clear a bookmark, or clear all bookmarks. Use Automatic Bookmark to insert bookmarks at certain locations, such as a tool change or operation change. The bookmarks are then displayed on the playback bar. Simply select any bookmark icon to display the part as it is at that moment. You can also use Create Bookmark on the playback bar to add a bookmark. If you exit Mastercam Simulator or regenerate the toolpaths, the bookmarks are cleared automatically.

They do not persist between sessions. Create presentation You can now create a presentation from Mastercam Simulator. Saving a presentation lets you preserve your settings and layout of your Mastercam 30 What’s New in Mastercam — General Enhancements Simulator session and can be used to show a simulation on any computer, even if it does not have Mastercam.

Select Save Presentation on the Home tab to create your presentation. Select Verify from the Toolpaths Manager, and select Simulation on the Home tab to view the machine simulation. Use the Components tab to set up stock and fixtures. Use the Data tab to set tolerances. Use the Simulation tab to set the machine, position, and tolerance.

If you do not have a machine selected when entering Mastercam Simulator, Mastercam will default to a generic machine or a machine that was selected in the Machine Simulation dialog box for the standalone Machine Simulation. Once logged in, you have access to Mastercam’s social media outlets, your Reseller information, the Mastercam forum, and other helpful information.

Alternately, you can select a member of the group, which will select the entire group. This new option is located on the Nesting Configuration dialog box. New location for temporary files Temporary nesting files now go into Mastercam’s default temp folder When creating a new plane by using the on-screen, dynamic gnomon, from the Planes Manager, using Trim to Plane, etc. When editing an existing plane, the Edit Plane function panel opens.

The function panels share the same controls, which are enabled or disabled as appropriate for the current mode. Import via drag and drop You can now drag and drop a supported file onto the Planes Manager to import the file’s planes. The Plane Selection dialog box displays and lets you select which planes to import. The planes are imported into the open Mastercam file. To ensure that Mastercam does not overwrite your part, machine, and control definition files, the save file workflow has been changed.

Mastercam part files When you open a Mastercam X9 or older part file in Mastercam , selecting Save opens the Save As dialog box, where you can save the file with the When you open a Mastercam part file in , you will see a warning banner in the interface that tells you the file is from a previous version of Mastercam. If you click Save, a warning will display. Choosing Yes saves the file as a Mastercam You can now select different types of entities without switching between Standard and Solid modes on the Selection Bar.

If both the Face and Body Selection filters are 46 What’s New in Mastercam — General Enhancements enabled, the cursor will alternate between face and body selection when moving over a solid. Mastercam displays a prompt to guide you through selection techniques. Hovering over a solid highlights the nearest face and displays the face selection cursor. Click to select a solid face or double-click to select a feature. If only the Face Selection filter is enabled, you can triple-click to select all faces of a solid body.

Click an individual face of the solid to deselect it from the body. Pressing [Esc] or double-clicking in an open area of the graphics window accepts the selection. Selection masking for sheet bodies A new sheet solid selection capability has been added to the Select All and Select Only dialog boxes.

Select Level or Viewsheet on the Capture Images dialog box to include them into your report. Click an icon to launch the website. System Configuration Listed below are enhancements made to System Configuration.

Default file open type You can set a default file type to be used when opening a file. The setting persists from session to session. Update to Parasolids This upgrade allows Mastercam to do the following: l Maintain compatibility with other CAD modelers l Benefit from new features and capabilities, when possible l Benefit from bug fixes within the kernel 52 What’s New in Mastercam — General Enhancements User Interface Changes The following functions have been converted to function panels for Mastercam After selecting an update option, the right side of the dialog box shows which planes will be updated.

You can select different update options and see which operations will be affected before committing the change. You can no longer output as text. These include improvements to Solid, Model Prep, and Wireframe functions.

Angle Sweep To improve the creation of more complex wireframe functions and when creating or editing primitives, there are now on-screen sweep and rotate controls. These controls can snap to the AutoCursor positions of existing entities, including tangencies.

Additionally, the controls recognize horizontal and vertical snap positions based on the gnomon orientation. All wireframe functions, with the exception of Polar arcs and Ellipses, now include a sweep control. Rotate controls were added to the following wireframe functions: Polygon, Ellipse, and Rectangular Shapes.

This also applies to Roll, located on the Transform tab. Helix and Spiral now include a single-axis control that lets you graphically modify the height of the shape you are creating and editing.

Seam Control To make Roll and Unroll results easier to predict, a new gnomon based rotation control is now available. You can visually rotate the seam to see how geometry will respond, as well as snap to AutoCursor positions. Align Note allows you to move existing notes and labels in such a way that they are more organized and easier to read.

After selecting the function, select the notes you wish to align, and then choose a note to use as the reference position. You can then make any adjustments needed from the function panel. Cross Hatch is also live, allowing you to see what you are creating before accepting it.

Unlike notes, labels, and letters, leaders are not live entities and cannot be edited. Methods used to align dimension orientations Auto, Horizontal, etc. When you select Lock, the specific Method you have selected stays active until you change it. You can easily create multiple dimensions using a specific orientation without having to reset it. Hole Axis Hole Axis is now easier to use with a large number of holes, especially holes with matching diameters that are selected as a group.

When you hold down the [Ctrl] key to select all holes with the same diameter, Mastercam calculates the top based on the direction of the hole. The result can be undesirable with multiple holes pointing in different directions. In previous releases, you had to individually select the axis inside the hole or select and then re-select each arrow to change the direction of the vector.

In , the vector arrow is larger and is selectable to make it easier to manage directions on a small set of holes. Direction options The new Direction options allows you to change the direction of the holes.

 

Mastercam 2018 level manager free download.Download Mastercam 2018 v20.0.21885.0 Update 3 x64 – Industrial Parts Design Software

 

Improved access to chaining tolerance Chaining tolerance is now stored with the chains in the Chain Manager. The value in the Chain Manager only affects the selected toolpath and is applied to all subsequent regenerations of the operation. Other toolpaths will continue to default to the chaining tolerance set in the Tolerances page of System Configuration. As with other operations in Mastercam, when you move or modify the geometry used in the Probe operation and regenerate, the operation will update with the new geometry.

You no longer need to recreate the Probe operation. Stock display The Stock Display and Stock Shading options, that were previously available on the View tab in Mastercam , are now located on the specific machine type tab and have been expanded. In the case of Mill, Router, and Wire machine types, Stock Display works as it did in previous versions. For Lathe and Mill-Turn machines, you can now control which stock components are displayed in the graphics window. For Mill-Turn machines, the available components depend on your Job Setup and your current machine.

If a component is not defined or available for your current machine setup, the option is disabled from the Stock Display drop-down. Guided Chaining You can now guide and select the next entity in a chain when a branch point has been reached.

Guided chaining is available in 3D Wireframe and Linked Edges mode for solids. One or more blue arrows display pointing in the direction of any alternate branches as shown in the following example. Two new controls are now available on the Chaining dialog box: Use Next to continue in the direction of the red arrow. Alternately, you can click on the red or blue arrow to advance the chain in that direction. Keep names when exporting solid bodies When exporting solids to other CAD formats, Mastercam will now export the solid name data with the bodies.

Naming levels and solid bodies from imported solid assemblies When importing solid assemblies, Mastercam’s file importers use a new protocol to populate both the Solids and Levels Manager. Mastercam processes the solid depending on what type of information is available from the incoming file format. If there is no level or body name data in the imported file, the body and the level name are the file name.

Levels Manager l l l l Level names from the imported file or assembly are preserved in the Mastercam part file. Even when importing from formats with no level data, Mastercam places the imported solid bodies on separate levels. The level name is based on the solid body name, when possible. When the information is present in the original file, Mastercam 26 What’s New in Mastercam — General Enhancements assigns the solid body name to each level.

To change this behavior, deselect Assign Level names to match Solid names on the Converters page of System Configuration. Mastercam organizes the various solid bodies of an assembly in the Solids Manager. Whenever possible, Mastercam names each imported solid body. Multiple bodies with the same name will have numbers appended. Bodies in separate part files in assemblies will include the name of the assembly in the Solids Manager.

Ignore blanked entities in count Select Ignore blanked entities in count from the Display options dropdown to not include blanked entities in the Entities column count. This option is off by default. Previously, blanked entities were included in the entity count and caused confusion between the count and visible entities on a level.

Import via drag and drop You can now drag and drop a supported file for example,. Mastercam Simulator Listed below are enhancements made to Mastercam Simulator, accessed through the Toolpaths Manager. You can add a bookmark, clear a bookmark, or clear all bookmarks. Use Automatic Bookmark to insert bookmarks at certain locations, such as a tool change or operation change.

The bookmarks are then displayed on the playback bar. Simply select any bookmark icon to display the part as it is at that moment. You can also use Create Bookmark on the playback bar to add a bookmark.

If you exit Mastercam Simulator or regenerate the toolpaths, the bookmarks are cleared automatically. They do not persist between sessions. Create presentation You can now create a presentation from Mastercam Simulator.

Saving a presentation lets you preserve your settings and layout of your Mastercam 30 What’s New in Mastercam — General Enhancements Simulator session and can be used to show a simulation on any computer, even if it does not have Mastercam. Select Save Presentation on the Home tab to create your presentation.

Select Verify from the Toolpaths Manager, and select Simulation on the Home tab to view the machine simulation. Use the Components tab to set up stock and fixtures. Use the Data tab to set tolerances.

Use the Simulation tab to set the machine, position, and tolerance. If you do not have a machine selected when entering Mastercam Simulator, Mastercam will default to a generic machine or a machine that was selected in the Machine Simulation dialog box for the standalone Machine Simulation. Once logged in, you have access to Mastercam’s social media outlets, your Reseller information, the Mastercam forum, and other helpful information.

Alternately, you can select a member of the group, which will select the entire group. This new option is located on the Nesting Configuration dialog box. New location for temporary files Temporary nesting files now go into Mastercam’s default temp folder When creating a new plane by using the on-screen, dynamic gnomon, from the Planes Manager, using Trim to Plane, etc.

When editing an existing plane, the Edit Plane function panel opens. The function panels share the same controls, which are enabled or disabled as appropriate for the current mode. Import via drag and drop You can now drag and drop a supported file onto the Planes Manager to import the file’s planes.

The Plane Selection dialog box displays and lets you select which planes to import. The planes are imported into the open Mastercam file. To ensure that Mastercam does not overwrite your part, machine, and control definition files, the save file workflow has been changed. Mastercam part files When you open a Mastercam X9 or older part file in Mastercam , selecting Save opens the Save As dialog box, where you can save the file with the When you open a Mastercam part file in , you will see a warning banner in the interface that tells you the file is from a previous version of Mastercam.

If you click Save, a warning will display. Choosing Yes saves the file as a Mastercam You can now select different types of entities without switching between Standard and Solid modes on the Selection Bar. If both the Face and Body Selection filters are 46 What’s New in Mastercam — General Enhancements enabled, the cursor will alternate between face and body selection when moving over a solid.

Mastercam displays a prompt to guide you through selection techniques. Hovering over a solid highlights the nearest face and displays the face selection cursor. Click to select a solid face or double-click to select a feature. If only the Face Selection filter is enabled, you can triple-click to select all faces of a solid body. Click an individual face of the solid to deselect it from the body. Pressing [Esc] or double-clicking in an open area of the graphics window accepts the selection.

Selection masking for sheet bodies A new sheet solid selection capability has been added to the Select All and Select Only dialog boxes. Select Level or Viewsheet on the Capture Images dialog box to include them into your report.

Click an icon to launch the website. System Configuration Listed below are enhancements made to System Configuration. Default file open type You can set a default file type to be used when opening a file. The setting persists from session to session. Update to Parasolids This upgrade allows Mastercam to do the following: l Maintain compatibility with other CAD modelers l Benefit from new features and capabilities, when possible l Benefit from bug fixes within the kernel 52 What’s New in Mastercam — General Enhancements User Interface Changes The following functions have been converted to function panels for Mastercam After selecting an update option, the right side of the dialog box shows which planes will be updated.

You can select different update options and see which operations will be affected before committing the change. You can no longer output as text. These include improvements to Solid, Model Prep, and Wireframe functions. Angle Sweep To improve the creation of more complex wireframe functions and when creating or editing primitives, there are now on-screen sweep and rotate controls.

These controls can snap to the AutoCursor positions of existing entities, including tangencies. Additionally, the controls recognize horizontal and vertical snap positions based on the gnomon orientation.

All wireframe functions, with the exception of Polar arcs and Ellipses, now include a sweep control. Rotate controls were added to the following wireframe functions: Polygon, Ellipse, and Rectangular Shapes. This also applies to Roll, located on the Transform tab. Helix and Spiral now include a single-axis control that lets you graphically modify the height of the shape you are creating and editing.

Seam Control To make Roll and Unroll results easier to predict, a new gnomon based rotation control is now available. You can visually rotate the seam to see how geometry will respond, as well as snap to AutoCursor positions.

Align Note allows you to move existing notes and labels in such a way that they are more organized and easier to read. After selecting the function, select the notes you wish to align, and then choose a note to use as the reference position. You can then make any adjustments needed from the function panel. Cross Hatch is also live, allowing you to see what you are creating before accepting it. Unlike notes, labels, and letters, leaders are not live entities and cannot be edited.

Methods used to align dimension orientations Auto, Horizontal, etc. When you select Lock, the specific Method you have selected stays active until you change it. You can easily create multiple dimensions using a specific orientation without having to reset it. Hole Axis Hole Axis is now easier to use with a large number of holes, especially holes with matching diameters that are selected as a group.

When you hold down the [Ctrl] key to select all holes with the same diameter, Mastercam calculates the top based on the direction of the hole. The result can be undesirable with multiple holes pointing in different directions.

In previous releases, you had to individually select the axis inside the hole or select and then re-select each arrow to change the direction of the vector. In , the vector arrow is larger and is selectable to make it easier to manage directions on a small set of holes.

Direction options The new Direction options allows you to change the direction of the holes. Use Opposite to flip the holes opposite of the direction determined by the Orientation option. Select Include blind holes to flip the direction of theoretical blind holes, but not true blind holes. A true blind hole has a physical bottom inside of the solid. A theoretical blind hole passes completely through a section of the solid. Orientation options Use the new Orientation options to determine the direction of the top of the holes.

Select Cplane to orient the top of the selected holes to match the positive direction of the Z axis of the current Cplane. Now, you can undo and redo up to twenty-five Model Prep functions using the new Undo and Redo, located on the Solids Manager. They only affect changes made using the Model Prep functions. Applying a history-based Solid function to the model clears the Undo and Redo memory stream and makes any previous Model Prep changes permanent.

Solid Enhancements Solid Sweep Solid Sweep now has more options and controls than in previous releases. Solid Sweep operations from previous releases will still have limited features when edited in Mastercam Only newly created Solid Sweep operations will support the new options.

Each profile must have an equal number of entities, but the profiles do not need to be chained in sync. The chains must contain the same number of entities, even if the shape is different.

Guide Chain Use a Guide Chain to influence a Solid Sweep operation by introducing a chain that alters the shape of the results. The images below depict the orange wireframe being swept across the blue wireframe. The green wireframe is the Guide Chain. Guide Chains are not limited to the same plane as the Along Chain. New alignment options Two new options have been added to control the alignment between your profile and the Along chains.

Previous releases always kept the same angle relationship between the Profile and Along curves. You can choose one of the following: Normal l l Parallel Normal maintains the original angle relationship between the profile and along chain. Parallel keeps the cross sections parallel to the original profile. The ability to control this relationship makes the exact placement of the profile in relation to the Along curve less critical.

In Mastercam , the profile geometry easily runs along sharp corners. If any sharp corners are encountered, Mastercam miters them. This enhancement gives you greater flexibility and precision when modeling. You can control the angle of the twist as well as its placement along the sweep. There is no limitation on the angle of the twist, and you can use the following options to apply the twist from a certain place: No twist Twist l The start of the Along Chain to the end l The start of the Profile Chain s to the end of the Along Chain l The start of the Along Chain to the Profile Chain s 69 What’s New in Mastercam — Design Enhancements Solids Manager New icon A new icon has been added to the Solids Manager that represents solid bodies with operations that have been rolled back and are dirty.

This is especially helpful when there are many solid bodies and the bodies are collapsed so the history is not displayed. Stop Operation placement There is now a simpler way to manipulate the Stop Operation inside the history of a solid.

You can now place the Stop Operation by selecting the operation you want to be last and selecting Move Stop Op here from the rightclick menu. Keep solid feature color Mastercam now retains a solid’s face and feature colors even after you have removed its history. Solid face masking You can now use the standard color masking tools found in the Quick Mask color selection to select solid faces when creating a surface from a solid.

Transform Enhancements Listed below are enhancements made to the Transform functions. Control start position Rotate and Mirror now include a new option, Translate, which maintains the same start position of a closed circle when rotated or mirrored. If deselected, the start position of the circle moves as it did in previous Mastercam releases. Select Metric or English in the Uniform group to scale your geometry.

Wireframe Enhancements Listed below are enhancements made to Wireframe functions. These new features will help in the creation of more accurate containment boundaries.

Ignore shared edges off Ignored shared edges on Only outside loops Curve All Edges now allows you to create curves from only exterior edges of a solid and ignores the inner edges when you select Only outside loops.

It is only active when solid faces are selected. Previously, these functions only supported creating geometry in 3D mode. By supporting 2D geometry creation, geometry created from the selected edge can be projected to the current Cplane and Z depth, instead of requiring you to use another function, such as Project. Create Letters is now in a function panel, allowing you to work simultaneously within the graphics window.

This also means that the letters are now live entities, so when you choose a new font, reposition, or edit the text it now shows the results in the graphics window. Use Edit Spline to refine and prepare splines. You can move, rotate, or lengthen the tangent vector or move the control point. For more control and a finer adjustment of the curve, you can add or remove node points, or increase the number of control points.

Helix and Spiral Helix and Spiral function panels now include locks for specific fields. The fields you can lock are Revolutions, Height, Pitch for helix creation, and Initial Vertical Pitch for spiral creation. Locking a field does not prevent you from changing that value, it simply establishes which field is constant and which two are calculated.

Select this option to create a line by selecting two points. The first point selected will be the midpoint and the second point will define one end while the other end of the line is a mirror in the opposite distance and angle. Modify at Intersection allows you to trim, break, or create points with lines, arcs, and splines where they intersect with surfaces, solid bodies, solid faces, and solid sheet bodies. This is particularly useful when modeling or prepping for Multiaxis toolpaths.

Select Modify at Intersection, and then use any selection method to select the wireframe geometry that you want to edit. After selecting the wireframe, select an intersecting surface, face, or solid body to display the function panel. When trimming geometry, Mastercam keeps the wireframe on the Normal side of the surface or solid by default.

To change this, click Reselect. Improved Inch and Metric Support Mastercam now supports mixing inch and metric tools and holders when building tool assemblies in Mill. The new tab is highlighted, so that you can input the name immediately after creating the viewsheet. By default, the new plane is added to the Planes Manager. Delete Duplicates Delete Duplicates now identifies duplicate arcs, even when they have different start and end angles. No Hidden Dimmed 20 What’s New in Mastercam — General Enhancements Endpoints Endpoint display has been enhanced, now displaying as solid white circles with a black outline to provide contrast with different geometry and background colors.

You can toggle Endpoints on the Home tab to display or hide geometry endpoints. Your setting will persist across multiple sessions of Mastercam. The size of the endpoints is not configurable, and they do not scale when the screen is re-sized. Improved access to chaining tolerance Chaining tolerance is now stored with the chains in the Chain Manager. The value in the Chain Manager only affects the selected toolpath and is applied to all subsequent regenerations of the operation.

Other toolpaths will continue to default to the chaining tolerance set in the Tolerances page of System Configuration. As with other operations in Mastercam, when you move or modify the geometry used in the Probe operation and regenerate, the operation will update with the new geometry.

You no longer need to recreate the Probe operation. Stock display The Stock Display and Stock Shading options, that were previously available on the View tab in Mastercam , are now located on the specific machine type tab and have been expanded. In the case of Mill, Router, and Wire machine types, Stock Display works as it did in previous versions. For Lathe and Mill-Turn machines, you can now control which stock components are displayed in the graphics window.

For Mill-Turn machines, the available components depend on your Job Setup and your current machine. If a component is not defined or available for your current machine setup, the option is disabled from the Stock Display drop-down. Guided Chaining You can now guide and select the next entity in a chain when a branch point has been reached. Guided chaining is available in 3D Wireframe and Linked Edges mode for solids. One or more blue arrows display pointing in the direction of any alternate branches as shown in the following example.

Two new controls are now available on the Chaining dialog box: Use Next to continue in the direction of the red arrow. Alternately, you can click on the red or blue arrow to advance the chain in that direction. Keep names when exporting solid bodies When exporting solids to other CAD formats, Mastercam will now export the solid name data with the bodies. Naming levels and solid bodies from imported solid assemblies When importing solid assemblies, Mastercam’s file importers use a new protocol to populate both the Solids and Levels Manager.

Mastercam processes the solid depending on what type of information is available from the incoming file format. If there is no level or body name data in the imported file, the body and the level name are the file name. Levels Manager l l l l Level names from the imported file or assembly are preserved in the Mastercam part file. Even when importing from formats with no level data, Mastercam places the imported solid bodies on separate levels. The level name is based on the solid body name, when possible.

When the information is present in the original file, Mastercam 26 What’s New in Mastercam — General Enhancements assigns the solid body name to each level. To change this behavior, deselect Assign Level names to match Solid names on the Converters page of System Configuration.

Mastercam organizes the various solid bodies of an assembly in the Solids Manager. Whenever possible, Mastercam names each imported solid body. Multiple bodies with the same name will have numbers appended.

Bodies in separate part files in assemblies will include the name of the assembly in the Solids Manager. Ignore blanked entities in count Select Ignore blanked entities in count from the Display options dropdown to not include blanked entities in the Entities column count.

This option is off by default. Previously, blanked entities were included in the entity count and caused confusion between the count and visible entities on a level. Import via drag and drop You can now drag and drop a supported file for example,. Mastercam Simulator Listed below are enhancements made to Mastercam Simulator, accessed through the Toolpaths Manager. You can add a bookmark, clear a bookmark, or clear all bookmarks. Use Automatic Bookmark to insert bookmarks at certain locations, such as a tool change or operation change.

The bookmarks are then displayed on the playback bar. Simply select any bookmark icon to display the part as it is at that moment. You can also use Create Bookmark on the playback bar to add a bookmark. If you exit Mastercam Simulator or regenerate the toolpaths, the bookmarks are cleared automatically. They do not persist between sessions. Create presentation You can now create a presentation from Mastercam Simulator.

Saving a presentation lets you preserve your settings and layout of your Mastercam 30 What’s New in Mastercam — General Enhancements Simulator session and can be used to show a simulation on any computer, even if it does not have Mastercam. Select Save Presentation on the Home tab to create your presentation. Select Verify from the Toolpaths Manager, and select Simulation on the Home tab to view the machine simulation.

Use the Components tab to set up stock and fixtures. Use the Data tab to set tolerances. Use the Simulation tab to set the machine, position, and tolerance. If you do not have a machine selected when entering Mastercam Simulator, Mastercam will default to a generic machine or a machine that was selected in the Machine Simulation dialog box for the standalone Machine Simulation. Once logged in, you have access to Mastercam’s social media outlets, your Reseller information, the Mastercam forum, and other helpful information.

Alternately, you can select a member of the group, which will select the entire group. This new option is located on the Nesting Configuration dialog box. New location for temporary files Temporary nesting files now go into Mastercam’s default temp folder When creating a new plane by using the on-screen, dynamic gnomon, from the Planes Manager, using Trim to Plane, etc.

When editing an existing plane, the Edit Plane function panel opens. The function panels share the same controls, which are enabled or disabled as appropriate for the current mode. Import via drag and drop You can now drag and drop a supported file onto the Planes Manager to import the file’s planes. The Plane Selection dialog box displays and lets you select which planes to import.

The planes are imported into the open Mastercam file. To ensure that Mastercam does not overwrite your part, machine, and control definition files, the save file workflow has been changed. Mastercam part files When you open a Mastercam X9 or older part file in Mastercam , selecting Save opens the Save As dialog box, where you can save the file with the When you open a Mastercam part file in , you will see a warning banner in the interface that tells you the file is from a previous version of Mastercam.

If you click Save, a warning will display. Choosing Yes saves the file as a Mastercam You can now select different types of entities without switching between Standard and Solid modes on the Selection Bar. If both the Face and Body Selection filters are 46 What’s New in Mastercam — General Enhancements enabled, the cursor will alternate between face and body selection when moving over a solid.

Mastercam displays a prompt to guide you through selection techniques. Hovering over a solid highlights the nearest face and displays the face selection cursor. Click to select a solid face or double-click to select a feature.

If only the Face Selection filter is enabled, you can triple-click to select all faces of a solid body. Click an individual face of the solid to deselect it from the body. Pressing [Esc] or double-clicking in an open area of the graphics window accepts the selection. Selection masking for sheet bodies A new sheet solid selection capability has been added to the Select All and Select Only dialog boxes. Select Level or Viewsheet on the Capture Images dialog box to include them into your report.

Click an icon to launch the website. System Configuration Listed below are enhancements made to System Configuration. Default file open type You can set a default file type to be used when opening a file.

The setting persists from session to session. Update to Parasolids This upgrade allows Mastercam to do the following: l Maintain compatibility with other CAD modelers l Benefit from new features and capabilities, when possible l Benefit from bug fixes within the kernel 52 What’s New in Mastercam — General Enhancements User Interface Changes The following functions have been converted to function panels for Mastercam After selecting an update option, the right side of the dialog box shows which planes will be updated.

You can select different update options and see which operations will be affected before committing the change. You can no longer output as text. These include improvements to Solid, Model Prep, and Wireframe functions. Angle Sweep To improve the creation of more complex wireframe functions and when creating or editing primitives, there are now on-screen sweep and rotate controls. These controls can snap to the AutoCursor positions of existing entities, including tangencies.

Additionally, the controls recognize horizontal and vertical snap positions based on the gnomon orientation. All wireframe functions, with the exception of Polar arcs and Ellipses, now include a sweep control.

Rotate controls were added to the following wireframe functions: Polygon, Ellipse, and Rectangular Shapes. This also applies to Roll, located on the Transform tab. Helix and Spiral now include a single-axis control that lets you graphically modify the height of the shape you are creating and editing.

Seam Control To make Roll and Unroll results easier to predict, a new gnomon based rotation control is now available.

You can visually rotate the seam to see how geometry will respond, as well as snap to AutoCursor positions. Align Note allows you to move existing notes and labels in such a way that they are more organized and easier to read. After selecting the function, select the notes you wish to align, and then choose a note to use as the reference position. You can then make any adjustments needed from the function panel. Cross Hatch is also live, allowing you to see what you are creating before accepting it.

Unlike notes, labels, and letters, leaders are not live entities and cannot be edited. Methods used to align dimension orientations Auto, Horizontal, etc. When you select Lock, the specific Method you have selected stays active until you change it. You can easily create multiple dimensions using a specific orientation without having to reset it. Hole Axis Hole Axis is now easier to use with a large number of holes, especially holes with matching diameters that are selected as a group.

When you hold down the [Ctrl] key to select all holes with the same diameter, Mastercam calculates the top based on the direction of the hole. The result can be undesirable with multiple holes pointing in different directions.

In previous releases, you had to individually select the axis inside the hole or select and then re-select each arrow to change the direction of the vector. In , the vector arrow is larger and is selectable to make it easier to manage directions on a small set of holes. Direction options The new Direction options allows you to change the direction of the holes. Use Opposite to flip the holes opposite of the direction determined by the Orientation option. Select Include blind holes to flip the direction of theoretical blind holes, but not true blind holes.

A true blind hole has a physical bottom inside of the solid. A theoretical blind hole passes completely through a section of the solid. Orientation options Use the new Orientation options to determine the direction of the top of the holes. Select Cplane to orient the top of the selected holes to match the positive direction of the Z axis of the current Cplane. Now, you can undo and redo up to twenty-five Model Prep functions using the new Undo and Redo, located on the Solids Manager.

They only affect changes made using the Model Prep functions. Applying a history-based Solid function to the model clears the Undo and Redo memory stream and makes any previous Model Prep changes permanent. Solid Enhancements Solid Sweep Solid Sweep now has more options and controls than in previous releases. Solid Sweep operations from previous releases will still have limited features when edited in Mastercam Only newly created Solid Sweep operations will support the new options.

Each profile must have an equal number of entities, but the profiles do not need to be chained in sync. The chains must contain the same number of entities, even if the shape is different. Guide Chain Use a Guide Chain to influence a Solid Sweep operation by introducing a chain that alters the shape of the results. The images below depict the orange wireframe being swept across the blue wireframe.

The green wireframe is the Guide Chain. Guide Chains are not limited to the same plane as the Along Chain. New alignment options Two new options have been added to control the alignment between your profile and the Along chains. Previous releases always kept the same angle relationship between the Profile and Along curves. You can choose one of the following: Normal l l Parallel Normal maintains the original angle relationship between the profile and along chain.

Parallel keeps the cross sections parallel to the original profile. The ability to control this relationship makes the exact placement of the profile in relation to the Along curve less critical. In Mastercam , the profile geometry easily runs along sharp corners. If any sharp corners are encountered, Mastercam miters them. This enhancement gives you greater flexibility and precision when modeling. You can control the angle of the twist as well as its placement along the sweep.

There is no limitation on the angle of the twist, and you can use the following options to apply the twist from a certain place: No twist Twist l The start of the Along Chain to the end l The start of the Profile Chain s to the end of the Along Chain l The start of the Along Chain to the Profile Chain s 69 What’s New in Mastercam — Design Enhancements Solids Manager New icon A new icon has been added to the Solids Manager that represents solid bodies with operations that have been rolled back and are dirty.

This is especially helpful when there are many solid bodies and the bodies are collapsed so the history is not displayed.

Stop Operation placement There is now a simpler way to manipulate the Stop Operation inside the history of a solid. You can now place the Stop Operation by selecting the operation you want to be last and selecting Move Stop Op here from the rightclick menu. Keep solid feature color Mastercam now retains a solid’s face and feature colors even after you have removed its history. Solid face masking You can now use the standard color masking tools found in the Quick Mask color selection to select solid faces when creating a surface from a solid.

Transform Enhancements Listed below are enhancements made to the Transform functions. Control start position Rotate and Mirror now include a new option, Translate, which maintains the same start position of a closed circle when rotated or mirrored.

If deselected, the start position of the circle moves as it did in previous Mastercam releases. Select Metric or English in the Uniform group to scale your geometry.

Wireframe Enhancements Listed below are enhancements made to Wireframe functions. These new features will help in the creation of more accurate containment boundaries. Ignore shared edges off Ignored shared edges on Only outside loops Curve All Edges now allows you to create curves from only exterior edges of a solid and ignores the inner edges when you select Only outside loops.

It is only active when solid faces are selected. Previously, these functions only supported creating geometry in 3D mode. By supporting 2D geometry creation, geometry created from the selected edge can be projected to the current Cplane and Z depth, instead of requiring you to use another function, such as Project. Create Letters is now in a function panel, allowing you to work simultaneously within the graphics window. This also means that the letters are now live entities, so when you choose a new font, reposition, or edit the text it now shows the results in the graphics window.

Use Edit Spline to refine and prepare splines. You can move, rotate, or lengthen the tangent vector or move the control point. For more control and a finer adjustment of the curve, you can add or remove node points, or increase the number of control points. Helix and Spiral Helix and Spiral function panels now include locks for specific fields.

The fields you can lock are Revolutions, Height, Pitch for helix creation, and Initial Vertical Pitch for spiral creation. Locking a field does not prevent you from changing that value, it simply establishes which field is constant and which two are calculated. Select this option to create a line by selecting two points.

The first point selected will be the midpoint and the second point will define one end while the other end of the line is a mirror in the opposite distance and angle.